Onze categorieën

RAL or PANTONE Tints in polyurethane 2K paint

Nieuw product

PACKAGING for our polyurethane lacquers with RAL or PANTONE® colour matching:
with yields in sqm in 2 passes

- 0.375ml Kit 
- 0.875ml Kit 
- 1.650ml Kit 
- 8.5 L Kit 
- 1 two-component Aerosol, 290ml 
- Pack of 3 two-component Aerosols, 290ml 

> Voir descriptif complet

- +

check Plus que 2400 en stock !

36,30€Inclusief VAT

Paiement securisé avec :logopaiement
Meer informatie

Choose the quantity of the desired product from the drop-down menu below,
then specify the RAL or PANTONE code at the time of the validation of the cart in the box provided for that purpose (you can also send us an email as a precaution)

Looking for a particular colour among all PANTONE or RAL tints?
Download the colour charts by clicking below:


> Fluorescent RAL colours (Yellow 1026 - Orange 2005 - Orange 2007 - Red 3024 - Red 3026 - Green 6038) are to be ordered only in our category "fluorescent paint"


Within 24h if the order is placed before 2PM (except weekends and public holidays)


the product is sold in a ready-to-use formula or in kit (pure tint + thinner)

PACKAGING for our 1K Basecoat with RAL or PANTONE® colour matching:

- 250ml Ready to use
- 500ml Ready to use
- 1L Kit: 0.5L Pure tint + 0.5L Thinner
- 2L Kit: 1L Pure tint + 1L Thinner
- 10L Kit: 5L Pure tint + 5L Thinner
- 400ml Aerosol
- Pack of 3 Aerosols, 400ml

Yield: 6-7m²/L in 2 coats
For aerosols, the coverage is 1 aerosol = 0.6m² max.



The solvent-based 1K Basecoats are particularly easy to apply: They can be applied with all types of sprayguns, in thin passes. (Spray gun with a nozzle of about 1.3mm)

The finer the coats are, the faster the drying and the shorter the wait time between each pass.
At 20°C, the coats are applied successively, whereas at cold temperature a 5min interval between each pass should be respected.

Clear coat:
Apply topcoat after 15min, with any of our clear coats (See Topcoats category)

13 other products in the same category

Recently Viewed